IMAX QURTTRO B6 (IMAX 4B6)

1.4*B6 in 1 2.can charge 4 Battery packs at the same time 3.Balancing individual cells battery discharging

Specifications:

Input: DC 11 to 15V

Power source: 12V DC (car battery)/ AC mains PSU (>200Watts0

Charger power: 50Watts, current is regulated accordingly.

Discharger power: 5 watts, current is regulated accordingly

Cell count: 1-15 Nicd/NiMH cells; 1-6S LiPo/Lilon/LiFe cells; 1-10 Lead-Acide cells (2V to 20V)

Current drain for balancing Lithoum: 300mA

Charge termination: automatic, negative delta peak method for NiCd/NiMh; and automatic, voltage-dependent, CC-CV process

Dimensions: 225.4 x 158.6 x 62.4mm

Net weight: 1.09kg

 

 

Features:

The iMax Quattro B6 allows you to plug 4 batteries into on charger simultaneously, and it will intelligently and automatically charge all 4 of them at once to their maximum capacity. To top of it, the batteries being charged do not even need to have the same configuration. You can connect different chemistry (ni-mh/Ni-Cd/LiPo/LiFe) batteries into any of the charging ports.

 

 

 

 

 

Packing:

1 x charger

1 x pair alligator clips for Pb battery

1 x alligator to bullet connector cable

1 x JST to bullet connector cable

1 x Futaba to bullet connector cable

1 x Tamiya to bullet connector cable

1 x bullet connector with wire

1 x TP/FP adaptor

1 x XH adaptor

 

 

 

 

Introduction:

At last, a charger where you can charge 4 Battery packs at the same time no matter what battery type you may have.

High Power & High Performance Circuit

Quattro B6 employs the circuit that has maximum output power of 200W. As a result it can charge or discharge 27 cells of NiCd/NiMH and 8 series of Lithium Batteries with maximum current of 7.0A. Furthermore the cooling system is so efficient that can hold such a power without any trouble of running the CPU or the operating program.

High Performance Micro Processor

iMax Quattro B6 Pro Charger & Balancer is a rapid charger with a high performance microprocessor.

Individual Voltage Balancer

Quattro B6 has an individual-cell-voltage balancer inside. This does not require any extra balancer when charging Lithium batteries (Lilo/LiPo-LiFe) for cell voltage balancing.

IMAX QURTTRO B6 (IMAX 4B6)